Grout Cleaning, Sealing & Re-Coloring

Grout Cleaning, Sealing & Re-Coloring


Why Colorseal?

Clear sealers, also known as impregnating sealers, fill the microscopic pores of your grout and buy you a little time to clean up a spill but provide little to no protection to the surface of the grout. Colorsealers not only protect the pores of the grout but leave a topical coating on top of the grout making it almost impervious to stains. With colorseal you also have more time to clean a spill without being concerned with the grout staining. Because it does not allow penetration, mop water can no longer flow into the grout lines and allow dirty water to seep into the grout and deposit dirt deep inside. This is why most grout is difficult to clean with traditional methods. You try scrubbing the grout surface, but the stains are deep inside where it is impossible to reach.

Grout Restoration

Just because your grout is stained and “splotchy” doesn’t mean you have to endure dusty, expensive and time consuming tear outs to make it look new again. The grout plays very little structural role in the performance of the tiled floor and there is seldom reason to remove it if everything else is in order. No Colorseal will fix defective grout, loose tiles, a bad subfloor or structural problems. But often grout can take a beating from harsh cleaning, minor substrate deflection and general wear and tear. Cleaners that contain bleach or acids will cause your grout to lose its color by removing or bleaching the pigmentation within the grout. Once this happens, no amount of cleaning will return it to its original color. Colorseal is the answer!


While a normal clear sealer can help to protect grout lines from stains a color- seal application can truly make your grout stain proof. A colorseal will seal your grout and make it waterproof and stain proof. Also, any dirt and spills on a colorsealed floor can be cleaned up with ease, making a colorsealed floor much easier to maintain. It also contains agents to reduce mildew and stops bacteria from growing in your grout.
If the tile and grout are maintained properly, the protection will last as long as your tile floor is in place.
First, the floor is professionally cleaned, neutralized, and fully dried. Then, the sealer is applied using professional equipment. Finally, the excess sealer is removed from the surface and the entire floor is cleaned and buffed to remove any haze.
The grout will look like new. It will retain its sandy appearance and will not look painted on like some other colorsealers.
Our colorsealer repels water-based and oil-based liquids, prevents stains caused by most food and beverages and protects the surface from dirt and impurities.